Problem to setup Non-Root Bridge

	Home \| Net Issues \| Net How To \| Wireless \| Case Studies \| Articles \| Forums \| Services \| Donations \| Careers \| About Us \| Contact Us\|

Problem to setup Non-Root Bridge

Q: I follow this: How to configure Cisco Wireless Bridge to setup a bridge wireless. The Root Bridge AP works fine. However, when I try Non-Root bridge, I get the error: "Set Infrastructure SSID' must be configured in order to set the 'Role in Radio Network' to "Repeater' or Non-Root Bridge". I can't follow the instruction.

A: In Express Security, Keep Access Point (don't check Non-Root Bridge). Click Apply to save it. Go to Security page to setup Encryption Manager and Client Authentication Key Management. Then come back to setup Non-Root Bridge.

Post your questions, comments, feedbacks and suggestions

Contact a consultant