Home | Net Issues | Net How To | Wireless | Case Studies | Articles | Forums | Services | Donations | Careers | About Us | Contact Us|

Configure switch for Dot1x Authentication

1. Telnet to switch and enable

2. Configuration terminal

3. Set network time protocol & timezone parameters

ntp server 128.105.39.11

clock summer-time CDT recurring 2 Sun Mar 2:00 1 Sun Nov 2:00

clock timezone CST-6

4. Create administrative username/password for telnet access

Service password-encryption

Username chicagotech privilege 15 password XXXXXX

5. Setup Dot1x authentication for switch

AAA new-model

AAA authentication login default local

AAA authentication dot1x default group radius

AAA authorization network default group radius

AAA accounting exec default start-stop group radius

AAA session-id common

Dot1x system-auth-control

Ip radius source-interface Vlan1

Radius-server host 10.0.20.55 auth-port 1645 acct-port 1646 key chicagotech

Radius-server source-ports 1645-1646

Contact a consultant

Related Topics